Products
Waterproof coating and wall paint manufacturer
Waterproofing is the core range, with interior and exterior latex paints, epoxy flooring and functional coatings alongside it. Buy finished product and build the market first. Then take the formulation, the raw materials and the equipment list, and produce it yourself.
- Product lines
- 16
- Family
- Cementitious waterproofing · Liquid-applied waterproofing · Latex wall paints · Functional coatings · Epoxy floor coatings
- Standards
- GB · JC/T
Cementitious waterproofing
5 products- Cementitious waterproofing
K11 polymer cement waterproof slurry
The bathroom and basement workhorse, in general and flexible grades
- General-purpose type
- Flexible type
- Table ranges span both types, not a single type
- Solids content
- ≥ 70%
- Tensile strength
- 1.2–1.8 MPa
- GB/T 23445-2025
- JC/T 2090-2011
- Cementitious waterproofing
JS polymer cement waterproof coating
Flexible, water-based, and happy on damp substrates
- Type I — flexible
- Type II
- Type III
- Table ranges span Types I–III, not a single type
- Solids content
- ≥ 70%
- Tensile strength
- 1.2–1.8 MPa
- GB/T 23445-2025
- Cementitious waterproofing
Capillary crystalline waterproof coating
Turns the concrete itself into the barrier
- Wet substrate bond
- ≥ 1.0 MPa (28 d)
- Compressive strength
- ≥ 15.0 MPa (28 d)
- GB/T 18445-2025
- Cementitious waterproofing
Rapid-setting leak plugging mortar
Sets in minutes, even against running water
- Setting time
- < 10 min
- Cementitious waterproofing
Tile adhesive, grout and bonding primer
The companion products that raise every order
Need a specific product? Contact us
Liquid-applied waterproofing
4 products- Liquid-applied waterproofing
Acrylic waterproof roof coating
Coloured, UV-stable, and the white one cools the building
Need a specific product? Contact us
- Liquid-applied waterproofing
Single-component polyurethane waterproof coating
Liquid applied, high strength, high elongation — one seamless membrane
- Class I
- Class II
- Class III
- Table ranges span Classes I–III, not a single class
- Solids content
- ≥ 85%
- Tensile strength
- 2.0–12.0 MPa
- GB/T 19250-2013
- Liquid-applied waterproofing
Bitumen emulsion waterproof coating
The price fighter for basements and roof base layers
- Solids content
- ≥ 45%
- Elongation at break
- ≥ 600%
- JC/T 408-2005
- Liquid-applied waterproofing
Silicone transparent water repellent
Invisible protection for walls, stone and brick
Need a specific product? Contact us
Functional coatings
5 products- Functional coatings
Fireproof coating for steel structures
Non-intumescent to 3 hours, intumescent to 2
- Fire resistance rating
- 0.5–2.0 / 0.5–3.0 h
- Coating thickness
- ≥ 1.5 / ≥ 15 mm
- GB 14907-2018
- Functional coatings
Sound insulation coating (damping)
Quieter floors and machine rooms from a trowel-applied coat
- Damping loss factor
- > 0.3
- Impact sound improvement
- ≈ 10 dB (3 mm)
- GB/T 16406-1996
- GB/T 19889.8-2006
- Functional coatings
Heat-insulating coatings, including waterproof systems
Solar-reflective coatings, and waterproofing that also insulates
- Solar-reflective thermal insulation coating
- Waterproof coating with thermal insulation
- Primer and build-up matched to the substrate
Need a specific product? Contact us
- Functional coatings
Water-based floor coating
Water-based acrylic floors, for low odour and a fast return to use
- Water-based acrylic floor coating
- Matched primer for the substrate
- Recoat specification for maintenance cycles
Need a specific product? Contact us
- Functional coatings
Anti-rust and anti-corrosion coatings
Two steps: convert the rust, then protect the steel
- Rust converter for already-corroded steel
- Water-based anti-corrosion coating
- Primer and topcoat matched to the exposure
Need a specific product? Contact us
Need a specific product? Contact us
These are product categories and common selection options. Tell us the application, substrate, colour and sheen, performance requirements and order quantity. We will confirm the exact product, compatible system, technical documents and quotation. Performance and suitability depend on the selected product's technical data and test results.
Talk to an engineer